All part numbers in
BOLD MAGENTA
are new this year.
2014 PARTS EUROPE OFFROAD
EXHAUST
EXHAUST
TIRES
TUBES &
WHEELS
TIRE
ACCESSORIES
ACCESSORIES
HANDLEBARS
& CONTROLS
FOOT
CONTROLS
BODY
GRAPHICS
& SEATS
SPROCKETS
CHAINS
BRAKES
SUSPENSION
ELECTRICAL
& GAUGES
ENGINE
FUEL/AIR
SYSTEMS
CHEMICALS
& LUBRICANTS
HARDWARE
& TOOLS
TRANSPORT
& TRAILER
RIDER
ACCESSORIES
MERCHANDISING
INDEX
41
IMPORTANT NOTE:
SEE PAGE 5 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EMISSION CONTROL REGULATORY
COMPLIANCE INFORMATION.
PART #
1860-0176
EXHAUST RIVET KIT
•Have the right parts ready to complete the job
•Steel rivets with corrosion-resistant coating
•Rivets designed to be pulled by a hand
operated rivet gun; no air power needed
•Rivet diameter
3
/
16
” with a grip range 3,2 mm to 15,2 mm (0,125” to 0,6”)
•Kit includes 20 rivets and
1 properly sized
3
/
16
” drill bit
•Made in the U.S.A.
SIZE
PART #
36,6 mm – 40,1 mm (1,44” – 1,58”) 1861‑0679
39,6 mm – 43,2 mm (1,56” – 1,70”) 1861‑0680
42,9 mm – 47,5 mm (1,69” – 1,87”) 1861‑0681
46 mm – 50,5 mm (1,81” – 1,99”) 1861‑0682
49,3 mm – 53,9 mm (1,94” – 2,12”) 1861‑0683
SIZE
PART #
52,3 mm – 56,9 mm (2,06” – 2,24”) 1861‑0684
55,6 mm – 60,2 mm (2,19” – 2,37”) 1861‑0685
58,7 mm – 63,2 mm (2,31” – 2,49”) 1861‑0686
62 mm – 66,5 mm (2,44” – 2,62”) 1861‑0687
66,8 mm – 71,4 mm (2,63” – 2,81”) 1861‑0688
STAINLESS STEEL EXHAUST CLAMPS
•Barrel and band design provide for superior clamping pressure
•Low profile hex head adjusting bolt
•Hold up to the repeated heating and cooling of the exhaust system
•Available in 10 sizes
•Sold individually
•Made in the U.S.A.
SILICA
EXHAUST
TAPE
•Designed to seal exhaust joint on the muffler
when repacking or, if needed, where the muffler
attaches to the header pipe
•Effectively seals the exhaust system against vapor
and engine residue leaks at couplings
•Max operation temperature is 982°C (1800°F)
•Woven silica tape
•1 mm thick x 25 mm W x 20,5 cm L (0,030” x 1” x 8”)
•Adhesive attached
•Two pieces included
•Made in the U.S.A.
PART #
1861-0842
PART #
M703
EXHAUST TAPE
•High-temperature exhaust sealing tape
with adhesive
•Designed to seal exhaust joints on the muffler when
repacking or if needed where the muffler attaches to the head pipe
•Max operating temperature is 274°C (525°F)
•Package includes two strips of tape; each measures 0,5 mm thick x
25 mm W x 20,5 cm L (0,020” x 1” x 8”)
•Made in the U.S.A.
EXHAUST WRAP
•Fiberglass cloth wrap available in black and tan
•Stable at temperatures up to 1093°C (2000°F)
•Insulates exhaust header pipes to protect you
and your machine from intense heat
•Generous size roll is enough to wrap one long
header or critical areas on multiple exhausts
•Made in the U.S.A.
DESCRIPTION
PART #
20,5 CM (8 INCH)
4‑pk.
1861‑0547
50‑pk.
1861‑0549
DESCRIPTION
PART #
35,5 CM (14 INCH)
4‑pk.
1861‑0548
50‑pk.
1861‑0550
STAINLESS STEEL TIE WRAPS
•For securing exhaust pipe wrap and cosmetic upgrades
•Anti-slip ball bearing locking device
•Made in the U.S.A.
DESCRIPTION
PART #
NATURAL
25 mm x 15,2 m (1” x 50’)
w/ tie wraps
1861‑0542
51 mm x 7,6 m (2” x 25’)
w/ tie wraps
1861‑0540
51 mm x 15,2 m (2” x 50’)
1861‑0544
51 mm x 30,5 m (2” x 100’)
1861‑0546
DESCRIPTION
PART #
BLACK
25 mm x 15,2 m (1” x 50’)
w/ tie wraps
1861‑0541
51 mm x 7,6 m (2” x 25’)
w/ tie wraps
1861‑0539
51 mm x 15,2 m (2” x 50’)
1861‑0543
51 mm x 30,5 m (2” x 100’)
1861‑0545
EXHAUST
PIPE WRAP
•For maximum fuel burn
or cosmetic upgrade
•Withstands direct heat up to 1093°C (2000°F)
•Available as listed; 25 mm x 15,2 m (1” x 50’) and 51 mm x 7,6 m (2” x 25’)
sizes include four stainless steel tie wraps
•Made in the U.S.A.
DESCRIPTION PART #
20,5 cm (8”)
2120‑0144
DESCRIPTION PART #
35,5 cm (14”)
2120‑0145
STAINLESS STEEL
CABLE TIES
•Perfect for high-temperature applications
•Ball bearing and barb fastening assembly locks
tightly and will not slip
•Use anywhere a normal cable tie isn’t strong
enough or can’t take the heat
•Two lengths available; sold in packs of five
•Made in the U.S.A.
DESCRIPTION
PART #
203 mm (8”) silver
2120‑0642
203 mm (8”) black
2120‑0643
DESCRIPTION
PART #
356 mm (14”) silver
2120‑0644
356 mm (14”) black
2120‑0645
LADDER-STYLE
CABLE TIES
•Self-locking design for fast and secure installation
•Ideal for applications that involve corrosion,
vibration and high temperatures
•Compatible and look great when used to
install exhaust and header wraps
•Available in two colors: silver 316 stainless
steel and polyester powder-coated black
•Available in 203 mm (8”) and 356 mm (14”) lengths
•Sold in 8-packs
1861‑0547
2120-0145
1861‑0540
DESCRIPTION
PART #
25 MM X 15,2 M (1” X 50’)
Tan
1861‑0339
Black
1861‑0340
DESCRIPTION
PART #
51 MM X 15,2 M (2” X 50’)
Tan
M30050
Black
1861‑0341
2120‑0642
2120‑0645
DESCRIPTION
PART #
38,1 mm ‑ 41,6 mm (1,5” ‑ 1,64”)
1861‑0870
41,4 mm ‑ 47,7 mm (1,63” ‑ 1,88”)
1861‑0871
44,4 mm ‑ 50,8 mm (1,75” ‑ 2”)
1861‑0872
49,3 mm ‑ 55,4 mm (1,94” ‑ 2,18”)
1861‑0873
DESCRIPTION
PART #
54,1 mm ‑ 60,2 mm (2,13” ‑ 2,37”)
1861‑0874
56,1 mm ‑ 65,0 mm (2,21” ‑ 2,56”)
1861‑0875
65,0 mm ‑ 72,9 mm (2,56” ‑ 2,87”)
1861‑0876
HEAVY-DUTY
EXHAUST CLAMPS
•Extra-strong T-bolt-style clamps
provide uniform clamping force to
help prevent leaks
•Made of corrosion-resistant stainless steel for
long-lasting good looks
•Sold each
1861‑0539
1861‑0339
1861‑0341
